Sailor's Delight Warps - 8/2 Tencel and Cotton Blend
These warps can be set up on the loom Front to Back or Back to Front. This 8/2 Tencel/Cotton blend is fabulously soft with a bit of sheen. It is a great marriage of cotton and Tencel. The Tencel speaks quietly without being shiny or slippery. The manufacturer labeled it as 8/2, but by my measurements it comes in a bit smaller. More like a 9/2. I would sett it similarly to an 8/2, but when in doubt, choose the tighter sett. 20 epi or 24 epi? I could choose the 24epi.
Because these warps are hand-dyed, no two warps will be identical. The length indicated on each warp tag is the approximate length after the shrinkage from the dye process, but in most cases they run a little longer than indicated in the description. When winding additional warp threads to be used with these, wind the new ones a little longer. Each warp has a white info tag located at the cross. The warp is tied in 5 places: At beginning loop, the “thread by thread” cross at the beginning, a raddle cross at the end and a choke tie near each end. If you need more ties to secure it due to your personal setup techniques, add more. Please look over them carefully when you get them. If they will not work for you, please return them in their original condition for a refund or exchange. No refund on shipping costs.
Please join us on Facebook’s Blazing Shuttles Chatter page for information about using Blazing Shuttle warps, to share photos of process and final products, and to offer insight and enthusiasm to others who are also using warps from Blazing Shuttles.
Shipping will be added at check out. An additional 5% of product price will be added to orders sent to countries other than the USA. (Minimum of $5) This can be avoided if you have an address in the US to which your warps can be shipped.
These warps can be set up on the loom Front to Back or Back to Front. This 8/2 Tencel/Cotton blend is fabulously soft with a bit of sheen. It is a great marriage of cotton and Tencel. The Tencel speaks quietly without being shiny or slippery. The manufacturer labeled it as 8/2, but by my measurements it comes in a bit smaller. More like a 9/2. I would sett it similarly to an 8/2, but when in doubt, choose the tighter sett. 20 epi or 24 epi? I could choose the 24epi.
Because these warps are hand-dyed, no two warps will be identical. The length indicated on each warp tag is the approximate length after the shrinkage from the dye process, but in most cases they run a little longer than indicated in the description. When winding additional warp threads to be used with these, wind the new ones a little longer. Each warp has a white info tag located at the cross. The warp is tied in 5 places: At beginning loop, the “thread by thread” cross at the beginning, a raddle cross at the end and a choke tie near each end. If you need more ties to secure it due to your personal setup techniques, add more. Please look over them carefully when you get them. If they will not work for you, please return them in their original condition for a refund or exchange. No refund on shipping costs.
Please join us on Facebook’s Blazing Shuttles Chatter page for information about using Blazing Shuttle warps, to share photos of process and final products, and to offer insight and enthusiasm to others who are also using warps from Blazing Shuttles.
Shipping will be added at check out. An additional 5% of product price will be added to orders sent to countries other than the USA. (Minimum of $5) This can be avoided if you have an address in the US to which your warps can be shipped.
These warps can be set up on the loom Front to Back or Back to Front. This 8/2 Tencel/Cotton blend is fabulously soft with a bit of sheen. It is a great marriage of cotton and Tencel. The Tencel speaks quietly without being shiny or slippery. The manufacturer labeled it as 8/2, but by my measurements it comes in a bit smaller. More like a 9/2. I would sett it similarly to an 8/2, but when in doubt, choose the tighter sett. 20 epi or 24 epi? I could choose the 24epi.
Because these warps are hand-dyed, no two warps will be identical. The length indicated on each warp tag is the approximate length after the shrinkage from the dye process, but in most cases they run a little longer than indicated in the description. When winding additional warp threads to be used with these, wind the new ones a little longer. Each warp has a white info tag located at the cross. The warp is tied in 5 places: At beginning loop, the “thread by thread” cross at the beginning, a raddle cross at the end and a choke tie near each end. If you need more ties to secure it due to your personal setup techniques, add more. Please look over them carefully when you get them. If they will not work for you, please return them in their original condition for a refund or exchange. No refund on shipping costs.
Please join us on Facebook’s Blazing Shuttles Chatter page for information about using Blazing Shuttle warps, to share photos of process and final products, and to offer insight and enthusiasm to others who are also using warps from Blazing Shuttles.
Shipping will be added at check out. An additional 5% of product price will be added to orders sent to countries other than the USA. (Minimum of $5) This can be avoided if you have an address in the US to which your warps can be shipped.
